Replicating Texas Instrument TMS320F28232PGFA DSP MCU Embedded Firmware needs to attack mcu tms320f28232 protective system and clone program out from MCU flash memory.

· High-Performance Static CMOS Technology

– Up to 150 MHz (6.67-ns Cycle Time)

– 1.9-V/1.8-V Core, 3.3-V I/O Design

· High-Performance 32-Bit CPU (TMS320C28x)

– IEEE-754 Single-Precision Floating-Point

Unit (FPU) (F2833x only)

– 16 x 16 and 32 x 32 MAC Operations

– 16 x 16 Dual MAC

– Harvard Bus Architecture

– Fast Interrupt Response and Processing

– Unified Memory Programming Model

– Code-Efficient (in C/C++ and Assembly)

· Six-Channel DMA Controller (for ADC, McBSP, ePWM, XINTF, and SARAM)

· 16-Bit or 32-Bit External Interface (XINTF)

– Over 2M x 16 Address Reach

· On-Chip Memory

– F28335, F28235:

256K x 16 Flash, 34K x 16 SARAM

– F28334, F28234:

128K x 16 Flash, 34K x 16 SARAM

– F28332, F28232:

64K x 16 Flash, 26K x 16 SARAM

– 1K x 16 OTP ROM

· Boot ROM (8K x 16)

– With Software Boot Modes (via SCI, SPI, CAN, I2C, McBSP, XINTF, and Parallel I/O)

– Standard Math Tables

· Clock and System Control

– Dynamic PLL Ratio Changes Supported

– On-Chip Oscillator

– Watchdog Timer Module

· GPIO0 to GPIO63 Pins Can Be Connected to One of the Eight External Core Interrupts